Gleisbild

Gleisbild · Beta

From a measured track to a design you can build.

Gleisbild turns a survey into an alignment you can build – and will explain why one alternative is the better one.

Survey points along a track and the geometry fitted to them: straights, transition curves and circular arcs
Survey points (red) and the fitted geometry of straights, transitions and arcs; the cross marks show the element boundaries.

What Gleisbild does today

Import

Surveys as JSON or TXT, with cant and markers; reference alignments as LandXML.

Fit

Fit straights, arcs and transitions to every measured point: with fixed or free element boundaries, locked lengths and radii, frozen sections and outlier review.

Design

Cant and vertical profile around the horizontal alignment; variants side by side; the track on the map in its own coordinate system.

Export

LandXML, configurable TXT, and project files to pass on.

What sets our software apart

  1. Judgement stays with people

    The software proposes and gives its reasons. The engineers responsible for the track decide.

  2. Verified, not promised

    We measure accuracy on tracks whose geometry is known, and say how good a result is and where its limits are.

  3. Your data stays yours

    Open formats, export at any time, and Gleisbild also runs entirely on your own computer, without cloud or internet.

  4. Open to every survey system

    Gleisbild works with surveys from different systems and ties you to no vendor.

  5. Honest about where we stand

    We say what works today and what is still in development. Even a long computation shows where it is and how long it still needs.

How it compares

Gleisbild next to a widely used competitor, feature by feature.

✓ available · — not available. Gleisbild as of today's beta, the competitor as of its April 2026 version.

FeatureGleisbild (beta)Competitor
Project handling
Newavailableavailable
Openavailableavailable
Deleteavailableavailable
Storageserver: on your own computer or in the cloud, with full historylocally in the browser
Importavailablenot available
Exportavailablenot available
Measurements per project11
Variantsavailablenot available
Map viewavailableavailable
Horizontal alignment
Supported elements
Straightsavailableavailable
Arcsavailableavailable
Clothoidsavailableavailable needs a straight or arc at the start or end
Markersavailableavailable
Initial element detection
Minimum element lengthavailableavailable
Maximum radiusavailableavailable
Edit horizontal elements
Newavailableavailable
Deleteavailableavailable
Adjust boundariesavailableavailable
Split elementsavailableavailable
Merge elementsavailablenot available
Change element typeavailableavailable
Editable list of declared elementsavailablenot available
Best fit and diagnosis
Fit with fixed boundariesavailablenot available
Best fitavailable only the unlocked partsavailable always the whole measurement
Residual graphavailableavailable
Inspect straightnessavailablenot available
Element diagnosticsavailablenot available
Best fit feedbackavailablenot available
Constraints
Start and end point coordinatesavailablenot available
Start and end point residualsavailableavailable
Start and end point azimuthavailableavailable
Seamless continuation from a reference alignmentavailablenot available
Seamless continuation from locked elementsavailablenot available
Lock elements in placeavailablenot available
Lock element lengthsavailablenot available
Lock arc radiusavailablenot available
Lock clothoid symmetryavailablenot available
Cant (superelevation)
Use horizontal element boundariesavailableavailable
Residual graphavailableavailable
Adjust cant boundariesnot availableavailable
Edit cant elements
Adjust cant within an elementavailableavailable
Newnot availableavailable
Deletenot availableavailable
Adjust boundariesnot availableavailable
Split elementsnot availableavailable
Change element typeavailableavailable
Vertical alignment
Initial best fitavailableavailable
Force fit within min/max tolerancesavailablenot available
Lift whole designavailableavailable
Editable list of declared elementsavailablenot available
Supported elements
Tangent intersectionsavailableavailable
Tangent intersections with roundingavailableavailable
Edit vertical elements
Newavailableavailable
Deleteavailableavailable
Adjust stationingavailableavailable
Adjust heightavailableavailable
Adjust radiusavailableavailable
Exports
LandXMLavailableavailable
LandXML – split reverse clothoidsavailablenot available
TXT – element definitionsavailablenot available
TXT – element definitions with diagnosticsavailablenot available
TXT – residuals per measurementavailablenot available
TXT – custom delimiter and separatoravailablenot available

Languages, units and formats

Gleisbild (beta)Competitor
Import formatsJSON, TXT, LandXML referenceASCII, JSON, the vendor’s own formats; more on request
LanguagesEnglish; German plannedEnglish, French, German, Spanish, Italian
Unitsmetres, international feetmetres, feet (international and US)

The feature overview is based on hands-on work with Gleisbild and the competitor, for the competitor with its April 2026 version. Later versions may do more. The competitor’s languages, units and import formats come from its public 2025 datasheet, checked on 17 November 2026. We welcome corrections.

Why this alternative? in development

Hard limits such as fixed connections, rule-set limits and permitted movements always hold. Preferences such as less lateral movement, less lifting or fewer elements only rank the alternatives that pass every limit. Each alternative comes with its assumptions and a plain explanation.

“This alternative moves the track sideways less, but needs more lift here. The fixed connection prevents a longer transition.”

How you work with Gleisbild

Load a survey

A survey of one stretch of track, as it comes from the recording car or the setting-out survey.

Set the elements

Gleisbild proposes a sequence of straights and curves; you confirm or change it.

Fit and check

The geometry is fitted to every measured point. Deviations, limits and outliers are visible.

Hand over

The result goes into your design and construction work as LandXML or TXT.

Beta

We are looking for engineering firms, infrastructure managers and surveyors who want to try Gleisbild with their own data. Beta participants get their own account on app.gleisbild.com.